Set: 2 – NCVT ITI NIMI Mock Test Draughtsman Civil Theory 1st YearTest Set: 2 – NCVT ITI NIMI Mock Test Draughtsman Civil Theory 1st Year Set: 2 – NCVT ITI NIMI Mock Test Draughtsman Civil Theory 1st Year 1 / 431. Which quadrilateral has all the sides equal and angles not at right angles? | कौन-सा चतुर्भुज होता है जिसकी सभी भुजाएं बराबर होती हैं लेकिन कोण समकोण नहीं होते? A) Rhombus | समचतुर्भुज B) Trapezoid | समलंब चतुर्भुज C) Rectangle | आयत D) Rhomboid | विषमकोण चतुर्भुज 2 / 432. What is the part marked as X shown in the figure? | चित्र में X से चिह्नित भाग क्या है? A) Corbel | कार्बल B) Cornice | कार्निस C) Blocking | ब्लॉकिंग D) String | स्ट्रिंग 3 / 433. What is the part marked as X shown in the figure? | चित्र में X से चिह्नित भाग क्या है? A) Blocking course | ब्लॉकिंग कोर्स B) Cornice | कार्निस C) Corbel | कार्बल D) Lintel | लिंटल 4 / 434. Where is the plan placed in third-angle projection? | थर्ड-एंगल प्रोजेक्शन में प्लान कहाँ रखा जाता है? A) Below elevation | एलिवेशन के नीचे B) Above elevation | एलिवेशन के ऊपर C) Left of elevation | एलिवेशन के बाईं ओर D) Right of elevation | एलिवेशन के दाईं ओर 5 / 435. What is the method of dimensioning shown in figure? | चित्र में दिखाई गई डाइमेंशनिंग की विधि क्या है? A) Aligned system | संरेखित प्रणाली B) Unidirectional system | एकदिशीय प्रणाली C) Chain dimension | श्रृंखला आयाम D) Parallel dimension | समानांतर आयाम 6 / 436. Which projection has projector from the object perpendicular to the plane? | किस प्रोजेक्शन में ऑब्जेक्ट से प्रोजेक्टर प्लेन पर लंबवत होते हैं? A) Isometric projection | आइसोमेट्रिक प्रोजेक्शन B) Oblique projection | तिर्यक प्रोजेक्शन C) Orthographic projection | ऑर्थोग्राफिक प्रोजेक्श D) Perspective projection | परिप्रेक्ष्य प्रोजेक्शन 7 / 437. What is the name of the given architectural symbol shown in figure? | चित्र में दिखाए गए आर्किटेक्चरल सिंबल का नाम क्या है? A) Floor plan symbols | फ्लोर प्लान सिंबल B) Data/Commas/TV symbols | डेटा/कॉमा/टीवी सिंबल C) Lighting symbols | लाइटिंग सिंबल D) Electric symbols | इलेक्ट्रिक सिंबल 8 / 438. How many grades are there in Portland cement? | पोर्टलैंड सीमेंट में कितने ग्रेड होते हैं? A) 2 Grade B) 3 Grade C) 4 Grade D) 5 Grade 9 / 439. How are unidirectional dimensions read in engineering drawings? | इंजीनियरिंग ड्रॉइंग्स में एकदिशीय आयाम कैसे पढ़े जाते हैं? A) From the top of the drawing | ड्रॉइंग के शीर्ष से B) From left to right | बाएँ से दाएँ C) From the bottom of the drawing | ड्रॉइंग के नीचे से D) From right to left | दाएँ से बाएँ 10 / 4310. What is the water absorption percentage for bricks? | ईंटों के लिए जल अवशोषण प्रतिशत क्या है? A) 16% B) 30% C) 50% D) 35% 11 / 4311. What is the untrimmed size of A5 designation drawing sheet? | A5 नामांकन ड्राइंग शीट का अपरिष्कृत आकार क्या है? A) 450 x 625 B) 330 x 450 C) 240 x 330 D) 165 x 240 12 / 4312. Which cement is suitable for chemical plants and furnaces? | रासायनिक संयंत्रों और भट्टियों के लिए कौन-सा सीमेंट उपयुक्त है? A) Expanding cement | विस्तारक सीमेंट B) High alumina cement | उच्च अल्युमिना सीमेंट C) Extra rapid hardening cement | अतिरिक्त तीव्र सख्त होने वाला सीमेंट D) Hydrophobic cement | जल-विकर्षक सीमेंट 13 / 4313. What does the factor 2:1 represents? | 2:1 का अनुपात क्या दर्शाता है? A) Enlarging scale | विस्तारण स्केल B) Reducing scale | छोटा करने वाला स्केल C) Full scale | पूर्ण स्केल D) Chord scale | जीवा स्केल 14 / 4314. What is the name of the scale that is denoted by 5 : 1? 5 : 1 से प्रदर्शित स्केल का क्या नाम है? A) Full scale | फुल स्केल B) Plain scale | प्लेन स्केल C) Reduced scale | रिड्यूस्ड स्केल D) Enlarged scale | इनलार्ज्ड स्केल 15 / 4315. Which test is conducted on stone to study minor constituents and grain size? | पत्थर में गौण घटकों और कण आकार का अध्ययन करने के लिए कौन-सा परीक्षण किया जाता है? A) Freezing test | हिमीकरण परीक्षण B) Smiths test | स्मिथ परीक्षण C) Microscopic test | सूक्ष्मदर्शी परीक्षण D) Hardness test | कठोरता परीक्षण 16 / 4316. What is the sum of the interior angle of Hexagon corresponding to the external angle? | बाह्य कोण के संगत षट्भुज के आंतरिक कोणों का योग क्या है? A) 270° B) 90° C) 120° D) 180° 17 / 4317. What is the property of a material to absorb water vapor from air called? | वायु से जलवाष्प को अवशोषित करने की सामग्री की क्षमता को क्या कहते हैं? A) Hygroscopicity | आर्द्रताग्राहिता B) Water absorption | जल अवशोषण C) Permeability | पारगम्यता D) Durability | टिकाऊपन 18 / 4318. What is the name of the diagram shown in figure? | चित्र में दिखाए गए आरेख का नाम क्या है? A) Trapezoid | समलंब चतुर्भुज B) Rhombus | समचतुर्भुज C) Trapezium | ट्रैपीज़ियम D) Parallelogram | समांतर चतुर्भुज 19 / 4319. What is the name of the line shown in figure? चित्र में दिखाई गई रेखा का नाम क्या है? A) Perpendicular line | लंबवत रेखा B) Curved line | वक्र रेखा C) Inclined line | झुकी हुई रेखा D) Parallel line | समानांतर रेखा 20 / 4320. Where is the rear view placed in first-angle projection? | फर्स्ट-एंगल प्रोजेक्शन में रियर व्यू कहाँ रखा जाता है? A) Right side of the right-side view | राइट-साइड व्यू के दाईं ओर B) Below elevation | एलिवेशन के नीचे C) Left side of the right-side view | राइट-साइड व्यू के बाईं ओर D) Above elevation | एलिवेशन के ऊपर 21 / 4321. Where should be the left side view drawn at 1st angle projection in relation to elevation? | फर्स्ट एंगल प्रोजेक्शन में एलिवेशन के संबंध में लेफ्ट साइड व्यू कहाँ बनाया जाना चाहिए? A) Above the elevation | एलिवेशन के ऊपर B) Below the elevation | एलिवेशन के नीचे C) To the right of elevation | एलिवेशन के दाईं ओर D) To the left of elevation | एलिवेशन के बाईं ओर 22 / 4322. What is the name of the given architectural symbol shown in figure? | चित्र में दर्शाए गए वास्तु प्रतीक का नाम क्या है? A) Sink | सिंक B) Wash basin | वॉश बेसिन C) Toilet | टॉयलेट D) Bath tub | बाथ टब 23 / 4323. What is the name of the triangle that has three unequal sides and angles? | उस त्रिभुज का नाम क्या है जिसकी तीनों भुजाएँ और कोण असमान होते हैं? A) Scalene triangle | विषमबाहु त्रिभुज B) Isosceles triangle | समद्विबाहु त्रिभुज C) Equilateral triangle | समबाहु त्रिभुज D) Right angled triangle | समकोण त्रिभुज 24 / 4324. What is the projection if the receding lines are drawn to ½ scale? | यदि पीछे हटती रेखाएं ½ स्केल पर बनाई जाएं, तो वह कौन-सा प्रोजेक्शन होगा? A) Cavalier projection | कैवेलियर प्रोजेक्शन B) Cabinet projection | कैबिनेट प्रोजेक्शन C) Clinographic projection | क्लिनोग्राफिक प्रोजेक्शन D) Axonometric projection | एक्सोनोमेट्रिक प्रोजेक्शन 25 / 4325. What is the name of the given architectural symbol shown in figure? | चित्र में दिखाए गए आर्किटेक्चरल सिंबल का नाम क्या है? A) Gas stoves | गैस स्टोव B) Closet | क्लोजेट C) Shower | शावर D) Square dining | स्क्वायर डाइनिंग 26 / 4326. What is known as the capacity of material to permit water to pass through it under pressure? | किसी पदार्थ की वह क्षमता जिससे वह दाब में पानी को अपने अंदर से गुजरने देता है, क्या कहलाती है? A) Durability | टिकाऊपन B) Permeability | पारगम्यता C) Porosity | सरंध्रता D) Ductility | लचीलापन 27 / 4327. Where should be the left side view drawn at 3rd angle projection in relation to elevation? | थर्ड एंगल प्रोजेक्शन में एलिवेशन के संबंध में लेफ्ट साइड व्यू कहाँ बनाया जाना चाहिए? A) Above the elevation | एलिवेशन के ऊपर B) Below the elevation | एलिवेशन के नीचे C) To the right of elevation | एलिवेशन के दाईं ओर D) To the left of elevation | एलिवेशन के बाईं ओर 28 / 4328. What is the name of the rock that marble is extracted? | उस चट्टान का नाम क्या है जिससे संगमरमर निकाला जाता है? A) Metamorphic rock | रूपांतरित चट्टान B) Foliated rock | पत्तेदार चट्टान C) Sedimentary rock | तलछटी चट्टानों D) Igneous rock | आग्नेय चट्टान 29 / 4329. What is the name of stone dressing finish shown in the figure? | चित्र में दिखाए गए पत्थर पर की गई फिनिश का क्या नाम है? A) Boasted finish | बोस्टेड फिनिश B) Hammer finish | हैमर फिनिश C) Reticulated finish | रेटिक्युलेटेड फिनिश D) Polished finish | पॉलिश्ड फिनिश 30 / 4330. What will be at the same height as that of station point and will lie on the horizon line? | स्टेशन बिंदु के समान ऊंचाई पर और क्षितिज रेखा पर क्या होगा? A) Focus | फोकस B) Vanishing point | लुप्त बिंदु C) Eccentricity | उत्केंद्रता D) Station point | स्टेशन बिंदु 31 / 4331. What is the process of removing about 20 cm depth of soil for brick manufacturing called? | ईंट निर्माण के लिए लगभग 20 cm मिट्टी की परत हटाने की प्रक्रिया को क्या कहते हैं? A) Unsoiling | अनसोलिंग B) Tempering | टेम्परिंग C) Blending (मिश्रण) D) Cleaning (सफाई) 32 / 4332. Which test is conducted to know the classification of lime? | चूने का वर्गीकरण जानने के लिए कौन-सा परीक्षण किया जाता है? A) Ball test | बॉल टेस्ट B) Visual test | विजुअल टेस्ट C) Impurity test | अशुद्धता परीक्षण D) Workability test | वर्केबिलिटी टेस्ट 33 / 4333. Which scale is used in the Isometric projection? | आइसोमेट्रिक प्रोजेक्शन में कौन सा स्केल प्रयोग किया जाता है? A) True scale | वास्तविक स्केल B) Isometric scale | आइसोमेट्रिक स्केल C) Verifier scale | सत्यापन स्केल D) Chord scale | जीवा स्केल 34 / 4334. What is the name of the symbol shown in the figure? | चित्र में दिखाए गए चिन्ह का नाम क्या है? A) Cutting | कटिंग B) Embankment | तटबंध C) Culvert | कलवर्ट D) Bridge | पुल 35 / 4335. Which is the other name of the perspective view? | पर्सपेक्टिव व्यू का दूसरा नाम क्या है? A) Photographic view | फोटोग्राफिक व्यू B) Oblique view | तिर्यक व्यू C) Isometric view | आइसोमेट्रिक व्यू D) Orthographic view | ऑर्थोग्राफिक व्यू 36 / 4336. What percentage of gypsum is added in cement manufacturing? | सीमेंट निर्माण में जिप्सम की कितनी प्रतिशत मात्रा मिलाई जाती है? A) 7–10% B) 5–7% C) 3–4% D) 1–2% 37 / 4337. Which rock has calcium carbonate as its main content? | किस चट्टान में कैल्शियम कार्बोनेट मुख्य घटक होता है? A) Argillaceous rocks (आर्गिलेशियस चट्टान) B) Siliceous rocks (सिलिशियस चट्टान) C) Foliated rocks (पर्णी चट्टान) D) Calcareous rocks (कैल्केरियस चट्टान) 38 / 4338. Which projection has projector from the object parallel to each other and incline to the plane? | किस प्रोजेक्शन में ऑब्जेक्ट से प्रोजेक्टर एक-दूसरे के समानांतर और प्लेन पर झुके होते हैं? A) Isometric projection | आइसोमेट्रिक प्रोजेक्शन B) Oblique projection | तिर्यक प्रोजेक्शन C) Orthographic projection | ऑर्थोग्राफिक प्रोजेक्शन D) Isometric view | आइसोमेट्रिक व्यू 39 / 4339. What is the recommended slumps of concrete for road construction? | सड़क निर्माण के लिए कंक्रीट की अनुशंसित स्लंप क्या है? A) 40 से 50 B) 70 से 80 C) 30 से 40 D) 20 से 40 40 / 4340. Which scale is generally used in maps? | मानचित्रों में आमतौर पर कौन-सी स्केल प्रयुक्त होती है? A) 1:10 B) 1:100 C) 1:10,000 D) 1:1,000,000 41 / 4341. Which BIS code no is recommended for folding of drawing sheets? | ड्रॉइंग शीट को मोड़ने के लिए कौन-सा BIS कोड अनुशंसित है? A) IS 11664 - 1989 B) IS 11664 - 1987 C) IS 11664 - 1986 D) IS 11664 - 1981 42 / 4342. What is the name of the diagram shown in figure? | चित्र में दिखाए गए आरेख का नाम क्या है? A) Square | वर्ग B) Rectangle | आयत C) Trapezoid | समलंब चतुर्भुज D) Rhombus | समचतुर्भुज 43 / 4343. What does the factor 1:1 represents? | 1:1 का अनुपात क्या दर्शाता है? A) Enlarging scale | विस्तारण स्केल B) Reducing scale | छोटा करने वाला स्केल C) Full scale | पूर्ण स्केल D) Chord scale | जीवा स्केल Your score is Restart Exit