Set: 1 – NCVT ITI NIMI Mock Test Surveyor 2nd Year TheoryTest Set: 1 – NCVT ITI NIMI Mock Test Surveyor 2nd Year Theory Set: 1 - NCVT ITI NIMI Mock Test Surveyor 2nd Year Theory 1 / 441. How many horizontal hairs are in a tacheometer? | टैकोमीटर में कितने क्षैतिज हेयर (बाल) होते हैं? A) 2 B) 3 C) 4 D) 5 2 / 442. Which map is used to determine the catchment area of drainage basins? | जल निकासी घाटियों के जलग्रहण क्षेत्र को निर्धारित करने के लिए किस मानचित्र का उपयोग किया जाता है? A) Cadastral map | कैडस्ट्राल का नक्शा B) Climatic map | जलवायु का नक्शा C) Political map | राजनीतिक नक्शा D) Contour map | कंटूर नक्शा 3 / 443. Which method of interpolation of contours is done with the help of tracing cloth? | ट्रेसिंग कपड़े की मदद से कंटूर के प्रक्षेप की कौन सी विधि की जाती है? A) Estimation | अनुमान B) Arithmetical calculation | अंकगणितीय गणना C) Graphical method | चित्रमय विधि D) Judgement | निर्णय 4 / 444. What is the distance from A to the 42 m contour given that the distance between A and B is 10m and they have reduced levels of 41.3 m and 43.8 m respectively? | A से 42 मीटर कंटूर के बीच की दूरी क्या है, यह देखते हुए कि A और B के बीच की दूरी 10 मीटर है और उनके रिड्यूस्ड लेवल क्रमशः 41.3 मीटर और 43.8 मीटर हैं? A) 3.0 m B) 2.8 m C) 3.5 m D) 2.6 m 5 / 445. Which line on the surface of the ground has a uniform inclination to the horizontal at all points? | जमीन की सतह पर कौन सी रेखा सभी बिंदुओं पर क्षैतिज से एक समान झुकाव रखती है? A) Contour interval | कंटूर अंतराल B) Contour gradient | कंटूर ग्रेडिएंट C) Horizontal line | क्षैतिज रेखा D) Parallel line | समानांतर रेखा 6 / 446. Which instrument is used for tracing contour points directly in the field? | सीधे मैदान में कंटूर बिंदुओं को ट्रेस करने के लिए किस उपकरण का उपयोग किया जाता है? A) Chain | चैन B) Prismatic compass | प्रिज्मीय कम्पास C) Hand level | हाथ का स्तर D) Planimeter | प्लैनीमीटर 7 / 447. In the tacheometric method of contouring, where are representative points located when taking staff readings? | टैकोमेट्रिक पद्धति से कंटूरिंग करते समय, प्रतिनिधि बिंदुओं का स्टाफ रीडिंग कहाँ लिया जाता है? A) Bottom, middle and top | नीचे, मध्य और ऊपर B) Only middle | केवल मध्य C) Only top | केवल शीर्ष D) Only bottom | केवल नीचे 8 / 448. What is the process of erecting stakes at a given elevation? | दी गई ऊंचाई पर स्टेक (खूंटे) लगाने की प्रक्रिया क्या है? A) Setting grade | ग्रेड निर्धारित करना B) Plotting grade | प्लॉटिंग ग्रेड C) Tracing | ट्रेसिंग D) Contouring | कोंटौरिंग 9 / 449. Which method of interpolation is rapid, gives approximate results and is used for small scale maps? | प्रक्षेप की कौन सी विधि तेज है, अनुमानित परिणाम देती है और छोटे पैमाने के नक्शों के लिए उपयोग की जाती है? A) By estimation | अनुमान से B) Arithmetical calculation | अंकगणितीय गणना C) Graphical | ग्राफ़िकल D) Tracing paper | ट्रेसिंग पेपर 10 / 4410. What is a depression between summits? | शिखरों के बीच के निचले हिस्से को क्या कहते हैं? A) Saddle | सैडल B) Vertical cliff | खड़ी चट्टान C) Overhanging cliff | ओवर हैंगिंग क्लिफ D) Hill | पहाड़ी 11 / 4411. Which T-shaped rods are used for setting out a grade? | ग्रेड की स्थापना के लिए किन T-आकार की छड़ों का उपयोग किया जाता है? A) Sight rail | साइट रेल B) Ranging rod | रेंजिंग रॉड C) Offset rod | ऑफसेट रॉड D) Boning rod | बॉनिंग रॉड 12 / 4412. Which method of contouring is unsuitable in hilly areas? | पहाड़ी क्षेत्र में कंटूरिंग की कौन सी विधि अनुपयुक्त है? A) Direct | प्रत्यक्ष B) Cross-section | अनुप्रस्थ काट C) Tacheometric | टैकोमेट्रिक D) Indirect | अप्रत्यक्ष 13 / 4413. What is the alternative name of 'Stadia method'? | 'स्टेडिया विधि' का वैकल्पिक नाम क्या है? A) Fixed hair method | फिक्स्ड हेयर मेथड B) Movable hair method | मूवेबल हेयर मेथड C) Subtense method | सबटेंस विधि D) Tangential method | स्पर्शरेखीय विधि 14 / 4414. What is another name for contouring by spot levels? | स्पॉट लेवल द्वारा कंटूरिंग का दूसरा नाम क्या है? A) Direct method | प्रत्यक्ष विधि B) Indirect method | अप्रत्यक्ष विधि C) Radial line method | रेडियल लाइन विधि D) Intersection method | प्रतिच्छेदन विधि 15 / 4415. Which among the following represents stadia interval factor? | निम्नलिखित में से कौन स्टेडियम अंतराल कारक का प्रतिनिधित्व करता है? A) f + d B) f - d C) f / i D) i / f 16 / 4416. Which is used to set out the gradient for a sewer? | सीवर के लिए ग्रेडिएंट सेट करने के लिए किसका उपयोग किया जाता है? A) Sight rails and boning rods | साइट रेल और बॉनिंग रॉड B) Sight rail only | केवल साइट रेल C) Boning rods only | केवल बॉनिंग रॉड D) Ranging rods | रेंजिंग रॉड 17 / 4417. What is the horizontal distance between two consecutive contours? | दो लगातार कंटूर के बीच क्षैतिज दूरी क्या है? A) Scale | स्केल B) Contour interval | कंटूर अंतराल C) Horizontal equivalent | क्षैतिज समतुल्य D) Linear measurement | रैखिक माप 18 / 4418. Which area is suitable for the square method of indirect contouring? | अप्रत्यक्ष कंटूरिंग की वर्ग विधि के लिए कौन सा क्षेत्र उपयुक्त है? A) Large | विशाल B) Heavy undulating | भारी उतार-चढ़ाव वाला C) Small and low undulating | छोटा और कम उतार-चढ़ाव वाला D) Hilly | पहाड़ी 19 / 4419. What is the value of D in the subtense bar method when the two targets are at a distance S apart, and each at S/2 from the centre, i.e. vertical axis and the horizontal angle α is measured carefully by means of a theodolite? | सबटेंस बार विधि में D का मान क्या है जब दो लक्ष्य एक दूसरे से दूरी S पर हैं, और प्रत्येक केंद्र से S/2 पर है, यानी ऊर्ध्वाधर अक्ष और क्षैतिज कोण α को थियोडोलाइट के माध्यम से सावधानीपूर्वक मापा जाता है? A) S/2a B) S/a C) S/4a D) 2S/a 20 / 4420. Which is the tacheometric formula for horizontal distance using inclined sights through θ obtained by? | θ के माध्यम से झुकी हुई दृष्टि का उपयोग करके क्षैतिज दूरी के लिए टैकोमेट्रिक सूत्र किसके द्वारा प्राप्त किया जाता है? A) The constant by Sin² θ | स्थिरांक को Sin² θ से B) The constant by Cos² θ | स्थिरांक को Cos² θ से C) The constant by Cos θ | स्थिरांक को Cos θ से D) The multiplying constant by Cos² θ and Additive constant by Cos θ | गुणक स्थिरांक को Cos² θ से और योज्य स्थिरांक को Cos θ से 21 / 4421. What is marked as 'x' in the figure? | चित्र में 'X' के रूप में क्या चिह्नित है? A) Sight rail | साइट रेल B) Boning rod | बॉनिंग रॉड C) String | स्ट्रिंग D) Wooden peg | लकड़ी की खूंटी 22 / 4422. What is the vertical distance between two consecutive contours? | दो लगातार कंटूर के बीच ऊर्ध्वाधर दूरी को क्या कहते हैं? A) Horizontal equivalent | क्षैतिज समतुल्य B) Contour interval | कंटूर अंतराल C) Contour line | कंटूर रेखा D) Contouring | कोंटौरिंग 23 / 4423. What is the controlling factor for locating a highway or canal on a contour map? | एक कंटूर मानचित्र पर एक राजमार्ग या नहर का पता लगाने के लिए नियंत्रक कारक क्या है? A) Scale | स्केल B) Horizontal equivalent | क्षैतिज समतुल्य C) Gradient line | ग्रेडिएंट रेखा D) Linear measurement | रैखिक माप 24 / 4424. Which is the method used for locating contour points along radial lines from a common point at the centre? | केंद्र में एक सामान्य बिंदु से रेडियल लाइनों के साथ कंटूर बिंदुओं का पता लगाने के लिए किस विधि का उपयोग किया जाता है? A) Indirect method | अप्रत्यक्ष विधि B) Direct method | प्रत्यक्ष विधि C) Tacheometric method | टैकोमेट्रिक विधि D) Square method | वर्ग विधि 25 / 4425. What is another name of the external focusing anallatic telescope in tacheometric surveying? | टैकोमेट्रिक सर्वेक्षण में बाहरी फोकसिंग एनालाटिक टेलीस्कोप का दूसरा नाम क्या है? A) Central telescope | सेंट्रल टेलीस्कोप B) Porro's telescope | पोरो का टेलीस्कोप C) Vernier telescope | वर्नियर टेलीस्कोप D) Adjusting telescope | एडजस्टिंग टेलीस्कोप 26 / 4426. Stakes or pegs are erected in the ground in such a way that their tops are at a given... | जमीन में खूंटे इस तरह से गाड़े जाते हैं कि उनके शीर्ष एक दिए गए ... पर हों। A) Ground level | ग्राउंड लेवल B) Formation level | फॉर्मेशन लेवल C) Line of collimation | संधान रेखा D) Bench mark | बेंचमार्क 27 / 4427. Which indirect method of contouring is suitable for long and narrow strips of land? | भूमि की लंबी और संकीर्ण पट्टियों के लिए कंटूरिंग की कौन सी अप्रत्यक्ष विधि उपयुक्त है? A) Square | वर्ग B) Tacheometry | टैकोमेट्री C) Cross-section | अनुप्रस्थ काट D) Direct | प्रत्यक्ष 28 / 4428. Every how many contour lines is one drawn thicker (as an index contour)? | कंटूर मानचित्र में आमतौर पर हर कौन सी कंटूर रेखा बाकी की तुलना में मोटी होती है? A) 2 B) 3 C) 4 D) 5 29 / 4429. Which is the indirect method of surveying? | सर्वेक्षण की अप्रत्यक्ष विधि कौन सी है? A) Chain surveying | जरीब सर्वेक्षण B) Tacheometry | टैकोमेट्री C) Contouring | कंटूरिंग D) Levelling | लेवलिंग 30 / 4430. Which method is suitable for the contouring of hilly areas? | पहाड़ी क्षेत्रों के कंटूरिंग के लिए कौन सी विधि उपयुक्त है? A) Direct | प्रत्यक्ष B) Square | वर्ग C) Cross-section | अनुप्रस्थ काट D) Tacheometric | टैकोमेट्रिक 31 / 4431. What is the process of placing the contour lines proportionally between plotted ground points? | प्लॉट किए गए जमीनी बिंदुओं के बीच आनुपातिक रूप से कंटूर रेखाओं को स्थापित करने की प्रक्रिया क्या है? A) Interpolation of contours | कंटूरों का प्रक्षेप B) Contouring | कोंटौरिंग C) Drawing of contours | कंटूरों का आरेखन D) Tracing | ट्रेसिंग 32 / 4432. Which method of contouring is most accurate but slow and tedious? | कंटूरिंग की कौन सी विधि सबसे सटीक लेकिन धीमी और थकाऊ है? A) Direct method | प्रत्यक्ष विधि B) Indirect | अप्रत्यक्ष C) Square | वर्ग D) Cross-section | अनुप्रस्थ काट 33 / 4433. What will be the value of additive constant lies in the range of? | योगात्मक स्थिरांक का मान किस सीमा में होता है? A) 0.2 to 0.3m B) 0.3 to 0.45m C) 0.5 to 0.6m D) 0.6 to 0.7m 34 / 4434. What method of contouring is used for small areas work with high precision? | छोटे क्षेत्रों में उच्च परिशुद्धता के साथ काम करने के लिए कंटूरिंग की कौन सी विधि इस्तेमाल की जाती है? A) Indirect method | अप्रत्यक्ष विधि B) Cross section method | क्रॉस सेक्शन विधि C) Direct method | प्रत्यक्ष विधि D) Square method | वर्ग विधि 35 / 4435. How is the staff reading required to set a given grade calculated? | दिए गए ग्रेड को सेट करने के लिए आवश्यक स्टाफ रीडिंग की गणना कैसे की जाती है? A) Formation level - Height of instrument | गठन स्तर - साधन की ऊंचाई B) Formation level + height of instrument | गठन स्तर + साधन की ऊंचाई C) Ground level + B.S | ग्राउंड लेवल + बी.एस. D) Ground level + F.S | ग्राउंड लेवल + एफ.एस. 36 / 4436. In which method of contouring are spot levels taken along a series of lines laid over the area? | कंटूरिंग की किस पद्धति में क्षेत्र पर खींची गई लाइनों की एक श्रृंखला के साथ स्पॉट लेवल लिए जाते हैं? A) Indirect | अप्रत्यक्ष B) Direct | प्रत्यक्ष C) Radial line | रेडियल लाइन D) Intersection | प्रतिच्छेदन 37 / 4437. Which line joins points of the same gradient on different contour lines? | कौन सी रेखा विभिन्न कंटूरों पर समान ढाल वाले बिंदुओं को जोड़ती है? A) Contour line | कंटूर रेखा B) Profile | प्रोफ़ाइल C) Contour gradient | कंटूर ढाल D) Contour sections | कंटूर खंड 38 / 4438. What is the representation of contour map in the figure? | आकृति में कंटूर मानचित्र क्या दर्शाता है? A) Hill | पहाड़ी B) Valley | घाटी C) Vertical cliff | खड़ी चट्टान D) Level ground | समतल जमीन 39 / 4439. Which method of interpolation of contour is laborious, tedious but most accurate? | कंटूर के प्रक्षेप की कौन सी विधि श्रमसाध्य, कठिन लेकिन सबसे सटीक है? A) Estimation | अनुमान B) Arithmetical calculation | अंकगणितीय गणना C) Graphical | ग्राफ़िकल D) Judgement | निर्णय 40 / 4440. What type of the anallatic lens is provided in tacheometer? | टैकोमीटर में किस प्रकार का एनालाटिक लेंस प्रदान किया जाता है? A) Convex and Concave lens | उत्तल और अवतल लेंस B) Convex lens | उत्तल लेंस C) Plane lens | समतल लेंस D) Concave lens | अवतल लेंस 41 / 4441. The formation level of point A is 130.00m and the ground level at A is 132.265m. The Height of instrument is 134.255m. What is the grade rod reading? | बिंदु A का फॉर्मेशन लेवल 130.00m है और A का ग्राउंड लेवल 132.265m है। यंत्र की ऊंचाई 134.255m है। तो ग्रेड रॉड रीडिंग क्या है? A) 4.255 m | 4.255 मी B) 2.265 m | 2.265 मी C) 1.755 m | 1.755 मी D) 1.265 m | 1.265 मी 42 / 4442. What is the process of locating contour lines on the surface of the earth? | पृथ्वी की सतह पर कंटूर रेखा का पता लगाने की प्रक्रिया क्या है? A) Contouring | कोंटूरिंग B) Relief | राहत C) Tracing | ट्रेसिंग D) Contour interval | कंटूर अंतराल 43 / 4443. What is the aperture required for tacheometer? | टैकोमीटर के लिए आवश्यक एपर्चर क्या है? A) 30 mm B) 40 mm C) 25 mm D) 15 mm 44 / 4444. What staff reading is required for setting a given grade? | दिए गए ग्रेड को सेट करने के लिए आवश्यक स्टाफ रीडिंग को क्या कहते हैं? A) Change point | चेंज पॉइंट B) Gradient | ग्राडिएंट C) Grade rod | ग्रेड रॉड D) Stakes | स्टेक्स Your score is Restart Exit