Set: 2 – NCVT ITI NIMI Mock Test Draughtsman Mechanical 2nd Year TheoryTest Set: 2 – NCVT ITI NIMI Mock Test Draughtsman Mechanical 2nd Year Theory Set: 2 - NCVT ITI NIMI Mock Test Draughtsman Mechanical 2nd Year Theory 1 / 451. Which command is used for opening a template? | टेम्प्लेट खोलने के बाद किस कमांड का उपयोग किया जाता है? A) New B) Open C) Insert D) Format 2 / 452. Which command is used to obtain common region of two intersecting parts in Auto cad? | ऑटो कैड में दो इंटरसेक्टिंग पार्ट का सामान्य क्षेत्र प्राप्त करने के लिए किस कमांड का उपयोग किया जाता है? A) Subtract B) Intersect C) Revolve D) Union 3 / 453. Which one of the following drives is used for transmitting power without slip? | निम्नलिखित में से कौन सी ड्राइव का उपयोग स्लिप के बिना बिजली संचारित करने के लिए किया जाता है? A) Belt drive | बेल्ट ड्राइव B) Chain Drive | चैन ड्राइव C) Rope drive | रोप ड्राइव D) Jokey pulley | जोकी पुली 4 / 454. What is the command of dimension for radius for circles or arcs? | सर्कल या आर्क के लिए रेडियस हेतु डायमेंशन का कमांड क्या है? A) QLEADER B) DIMEDIT C) DIMRADIUS D) DIMDIAMETER 5 / 455. Which of the following is used for chain drive? | चेन ड्राइव के लिए किस चीज़ का उपयोग किया जाता है? A) Spur gear | स्पर गियर B) Idler gear | आइडलर गियर C) Sprockets | स्प्रॉकेट्स D) Worm gear | वॉर्म गियर 6 / 456. What is the icon of 'Hatch' command in toolbar? | टूलबार में 'Hatch' कमांड का आइकन क्या है? A) Option (A) B) Option (B) C) Option (C) D) Option (D) 7 / 457. What is the function of insert block in AutoCAD? | ऑटोकैड में इन्सर्ट ब्लॉक का कार्य क्या है? A) To insert presaved shape in current drawing | वर्तमान ड्राइंग में पहले से सेव की गई आकृति को इन्सर्ट करने के लिए B) To open a save shape | सेव की गई आकृति ओपन के लिए C) To save a new shape | नई आकृति सेव करने के लिए D) To edit a new shape | नई आकृति एडिट करने के लिए 8 / 458. Which command is used for adding height to 3D figure in Auto cad? | ऑटो कैड में 3D आकृति में ऊंचाई जोड़ने के लिए किस कमांड का उपयोग किया जाता है? A) Extrude B) Extend C) Explode D) Union 9 / 459. What will be the command prompt to create new dimension style? | नए डायमेंशन स्टाइल बनाने के लिए कमांड प्रॉम्प्ट क्या होगा? A) DDIM B) DIMEDIT C) QLEADER D) DIM RADIUS 10 / 4510. What is polar array? | Polar array क्या है? A) To make multiple copies of an object in circular pattern | सर्कुलर पैटर्न में किसी ऑब्जेक्ट की मल्टिपल कॉपी बनाना B) To draw any object in circular pattern | सर्कुलर पैटर्न में किसी ऑब्जेक्ट को ड्रॉ करने के लिए C) To hatch any object | किसी ऑब्जेक्ट को हैच करना D) To move any object | किसी ऑब्जेक्ट को मूव करने के लिए 11 / 4511. Which command window contains pattern? | कौन सी कमांड विंडो में पैटर्न होता है? A) Property setting B) Array C) Hatch and Gradient D) Line type manager 12 / 4512. What is the another name of speed cone pulley? | स्पीड शंकु पुली का दूसरा नाम क्या है? A) Built up cone pulley | बिल्ट अप कोन पुली B) Stepped cone pulley | स्टेप्ड कोन पुली C) C.I cone pulley | C.I कोन पुली D) V belt cone pulley | V बेल्ट कोन पुली 13 / 4513. Which sign should you click to disappear the layer from the screen in layer dialogue box? | लेयर डायलॉग बॉक्स में, स्क्रीन को गायब करने के लिए आपको किस चिन्ह पर क्लिक करना चाहिए? A) On freeze sign | फ्रीज साइन पर B) On bulb sign | बल्ब साइन पर C) On lock sign | लॉक साइन पर D) On box sign | बॉक्स साइन पर 14 / 4514. Which command is used to cut a line in Auto CAD? | AUTO CAD में एक लाइन को काटने के लिए कौन सी कमांड प्रयोग की जाती है? A) Extend B) Trim C) Delete D) Offset 15 / 4515. What is the effect of 'V' groove on the pulley? | चरखी पर 'V' ग्रूव का क्या प्रभाव है? A) No friction grip of 'V' belt | 'वी' बेल्ट की कोई घर्षण पकड़ नहीं B) To increase friction grip of 'V' belt | 'V' बेल्ट की घर्षण पकड़ को बढ़ाने के लिए C) To decrease friction grip of 'V' belt | 'V' बेल्ट की घर्षण पकड़ को कम करने के लिए D) Less friction grip of 'V' belt | 'V' बेल्ट की कम घर्षण पकड़ 16 / 4516. What is TTR method of drawing circle in AutoCAD? | ऑटोकैड में वृत्त बनाने की TTR विधि क्या है? A) Tangent Tangent Rectangle B) Tangent Trim Radius C) Tangent Tangent Radius D) Total Trim Radius 17 / 4517. What is material of 'V' belt? | 'V' बेल्ट की सामग्री क्या है? A) CI | सीआई B) Fabric & Rubber | कपड़ा और रबड़ C) Cotton | कॉटन D) Steel | इस्पात 18 / 4518. What is the including angle of 'V' belt? | 'V' बेल्ट का कोण क्या है? A) 15° B) 30° C) 40° D) 60° 19 / 4519. What is the shortcut command of layer? | लेयर की शॉर्टकट कमांड क्या है? A) LA B) L1 C) L D) LO 20 / 4520. Which pull down menu contains layer? | किस पुल डाउन मेनू में लेयर है? A) Layer B) Draw C) Annotation D) Help 21 / 4521. In which command window do you find gradient? | किस कमांड विंडो में आप ग्रेडिएंट फाइंड करते हैं? A) Block B) Hatch C) Circle D) Array 22 / 4522. What do you understand by the given symbol? | दी गए सिम्बल से आप क्या समझते हैं? A) Dimension Text Edit | डायमेंशन टेक्स्ट एडिट B) Dimension Linear | डायमेंशन लिनियर C) Ordinate Dimensioning | ऑर्डिनेट डायमेंशनिंग D) Angular Dimensioning | एंगुलर डायमेंशनिंग 23 / 4523. What is shortcut of array command? | array कमांड का शॉर्टकट क्या है? A) A B) AR C) B D) C 24 / 4524. How do layers help? | लेयर्स कैसे मदद करती हैं? A) Layer makes multiple objects | लेयर मल्टिपल ऑब्जेक्ट बनाती है B) Layer creates identical objects | लेयर एक समान ऑब्जेक्ट्स का निर्माण करती है C) Layers allow to easy control and edit properties of a group of objects | लेयर्स ऑब्जेक्टों के ग्रुप के प्रॉपर्टी को आसानी से कंट्रोल और एडिट करने की अनुमति देती हैं D) Layer makes block object | लेयर ब्लॉक ऑब्जेक्ट बनाती है 25 / 4525. Which one of these options palette is found in Modify Dimension Style dialogue box? | इनमें से कौन सा ऑप्शन पैलेट Modify Dimension Style dialogue box में पाया जाता है? A) Primary units B) Polar tracking C) By layer D) Format 26 / 4526. Which sign should you click to disappear the layer from the screen in layer dialogue box? | लेयर डायलॉग बॉक्स में, स्क्रीन को गायब करने के लिए आपको किस चिन्ह पर क्लिक करना चाहिए? A) On freeze sign | फ्रीज साइन पर B) On bulb sign | बल्ब साइन पर C) On lock sign | लॉक साइन पर D) On box sign | बॉक्स साइन पर 27 / 4527. Which command panel contains array command? | किस कमांड पैनल में array कमांड है? A) Modify B) Draw C) Dimension D) Drafting Setting 28 / 4528. Which command is use to arrange an object in rectangular matrix or polar grid? | किसी ऑब्जेक्ट को आयताकार मैट्रिक्स या पोलर ग्रिड में व्यवस्थित करने के लिए किस कमांड का उपयोग किया जाता है? A) Copy B) Move C) Mirror D) Array 29 / 4529. What is the application of array command in Auto CAD? | ऑटो कैड में array कमांड का अनुप्रयोग क्या है? A) Distributed copies of selected object in rectangular or circular pattern | चयनित ऑब्जेक्ट की आयताकार या वृत्ताकार पैटर्न में वितरित प्रतियां B) To create deflected object | डिफ्लेक्टेड ऑब्जेक्ट बनाने के लिए C) To copy object in irregular form | किसी ऑब्जेक्ट को अनियमित रूप में कॉपी करने के लिए D) To create scattered mirror image | स्कैटर्ड मिरर इमेज को क्रिएट करना 30 / 4530. What do you mean by 'DIMALINIER' command? | 'DIMALINIER' कमांड से आपका क्या तात्पर्य है? A) To draw a linear dimension | लिनीयर डायमेंशन ड्रॉ करने के लिए B) To draw an aligned dimension | अलाइन्ड डायमेंशन ड्रॉ करने के लिए C) To draw dimension for diameter circle | डायमीटर सर्कल के लिए डायमेंशन ड्रॉ करने के लिए D) To draw angular dimension | एंगुलर डायमेंशन ड्रॉ करने के लिए 31 / 4531. Why is the crowning of pulley done? | पुली की क्राउनिंग क्यों की जाती है? A) To make than more stylish | अधिक रूप बनाने के लिए B) To avoid slipping of the belt | बेल्ट के फिसलने से बचने के लिए C) To make pulley more pleasant | चरखी अधिक बनाने के लिए D) To make pulley light weight | चरखी हल्के वजन करने के लिए 32 / 4532. What is the symbol of continue dimensioning? | निरंतर आयामीकरण का प्रतीक क्या है? A) Option (A) B) Option (B) C) Option (C) D) Option (D) 33 / 4533. Which command is used to create specific gap of a line? | लाइन के विशिष्ट अंतर को बनाने के लिए किस कमांड का उपयोग किया जाता है? A) Break two point B) Break one point C) Trim D) Short 34 / 4534. What is main advantage of using array command? | array कमांड का उपयोग करने का मुख्य लाभ क्या है? A) It allows you to copy objects in a definite angle and exact no. of copy | यह आपको ऑब्जेक्ट को एक निश्चित कोण और प्रतिलिपि की सटीक संख्या में कॉपी करने की अनुमति देता है B) To enlarge the object | ऑब्जेक्ट का विस्तार करना C) To enclose the boundary of object | ऑब्जेक्ट की बाउंड्री को घेरने के लिए D) To create mirror image of object | ऑब्जेक्ट का मिरर इमेज बनाना 35 / 4535. What do you find in layer dialogue box among the followings? | निम्नलिखित में से कौन डायलॉग बॉक्स में होता है? A) Scale B) Line type C) Copy D) Displacement 36 / 4536. What is a template in AutoCAD? | ऑटोकैड में एक टेम्प्लेट क्या है? A) A file that is already setup for specific application | एक फ़ाइल जो पहले से ही विशिष्ट एप्लिकेशन के लिए सेटअप है B) A file contains different types of figure | एक फ़ाइल में विभिन्न प्रकार के चित्र होते हैं C) A command for creating identical object | एक समान ऑब्जेक्ट के लिए एक कमांड D) A command for making a block | एक ब्लॉक बनाने के लिए एक कमांड 37 / 4537. Which selected template file open in Auto CAD? | ऑटोकैड में कौन सी चयनित टेम्प्लेट फ़ाइल खुलती है? A) Model space | मोडल स्पेस B) Layout space | लेआउट स्पेस C) Work space | वर्क स्पेस D) Design space | डिज़ाइन स्पेस 38 / 4538. What is the command of DIMENSION edit? | DIMENSION edit का कमांड क्या है? A) DIMSTYLE B) DIMANGULAR C) DIMEDIT D) QLEADER 39 / 4539. What is the use of 'Hatch' command? | 'Hatch' कमांड का उपयोग क्या है? A) To make multiple object | कई ऑब्जेक्ट बनाने के लिए B) To fill an enclosed area with a pattern | एक पैटर्न के साथ एक संलग्न क्षेत्र को भरने के लिए C) To create new close object | नई क्लोज ऑब्जेक्ट बनाने के लिए D) To split the object | ऑब्जेक्ट को स्प्लिट करना 40 / 4540. How many types of array command are there in Auto CAD? | ऑटो कैड में कितने प्रकार के array कमांड होते हैं? A) 1 B) 2 C) 3 D) 4 41 / 4541. Where do you click to create a new layer? | एक नया लेयर बनाने के लिए, आप कहाँ क्लिक करते हैं? A) Layer properties B) Block C) Scale D) Circle 42 / 4542. What command is used for doing own dimension style? | स्वयं डायमेंशन स्टाइल करने के लिए कौन सी कमांड का उपयोग किया जाता है? A) DIEMDIT B) DIMSTYLE C) DIM ANGULAR D) DIMRAIUS 43 / 4543. Which of the following is related to the 2D poly line? | निम्नलिखित में कौन पॉली लाइन से संबंधित है? A) Arc and line together | आर्क व लाइन साथ में B) Change the arc to the line | आर्क को लाइन में बदलना C) Only make arc | केवल आर्क बनाना D) Change the line to the arc | लाइन को आर्क में बदलने के लिए 44 / 4544. What is material of Pulley? | पुली के लिए सामग्री क्या है? A) CI | सीआई B) Plastic | प्लास्टिक C) Lather | लेदर D) Fabric | कपड़ा 45 / 4545. What do you understand by this figure in dimensioning? | डायमेंशनिंग में इस आकृति से आप क्या समझते हैं? A) Leader B) Align dimension C) Angular dimension D) Text edit Your score is Restart Exit